CALL US AT 713-464-3910

Electric Motors –

Largest Stocking Distributor in Houston

    Customers looking for electric motor sales in Houston and the Gulf Coast area of Texas come to HMC. We are one of the largest stocking distributors of electric motors in the South! We stock 1/3HP fractional motors to 500HP, and beyond. HMC is a master distributor for the following lines of motors: WEG, TECO-Westinghouse, Brook, Leeson and Elektrim. We have the below motor types in stock, ready to ship to you!

  • Explosion Proof (https://motor-hmc.com/explosion-proof-motors/): Three phase, high efficiency and NEMA Premium explosion proof motors for hazardous locations. UL/CSA certified, totally enclosed cast iron.
  • TEFC (Totally Enclosed Fan Cooled) – most commonly used motor in ordinary industrial environments. Enclosure that does not permit outside air to circulate through the interior of the motor. Has a small fan on the rear of shaft covered by a housing. This fan forces air over the motor frame, and cools the motor.  The motor is dust tight, and has a moderate water seal as well. TEFC motors are not secure against high pressure water.
  • ODP (Open Drip Proof): Allows air to circulate through the windings for cooling, but prevents drops of liquid from falling into motor within a 15 degree angle from vertical. Typically used for indoor applications in relatively clean, dry locations.
  • ATEX (https://motor-hmc.com/atex-motors/) : Motors for Explosive Atmospheres according to the European ATEX Directive. Explosion Proof (Ex d) and Non Sparking (Ex nA) models.
  • Metric (https://motor-hmc.com/metric-motors-with-terminal-blocks/): IEC Frame Metric motors are designed to meet international standards (including IEC 60034-30 efficiency requirements) as replacement motors for overseas applications and machinery such as pumps, conveyors, fans and more.
  • Oil Well Pumper / Design D (https://motor-hmc.com/oil-well-pump-motors/): Single & three phase pump motors that have a high slip and high torque that oil well beam pumping units demand.
  • NEMA – National Electrical Manufacturers Association fully comply with EISA 2007 Regulation, mandatory Dec 2010.
  • IEEE-841 – (https://motor-hmc.com/ieee-motors/): NEMA Premium motors meet or exceed all NEMA Premium® requirements for energy efficiency, standard for the petroleum and Chemical Industry.
  • Fractional – Single & three phase fractional general purpose motors , rolled steel frame, open and totally enclosed enclosures.  These are Premium Efficient motors that meet or exceed the directive from the US Department of Energy for efficiency (10 CFR Part 31).
  • Medium Voltage (https://motor-hmc.com/products1/electric-motors/medium-voltage-motors/): Designed with optimized construction and manufactured in robust frames for all applications, including severe service.